Broadcom 802 11n network adapter driver 7 12 39 0
Author: m | 2025-04-25
802 broadcom adapter network 11n driver windows Broadcom bluetooth driver download in windows Broadcom stuurprogramma. Broadcom 802.11g Network Adapter
802 11n Wireless Usb Adapter Driver Download - Telegraph
Heavy, the adapter issues one host interrupt for multiple, back-to-back incoming packets, preserving host CPU cycles. Dual DMA Channels The PCIe interface on Broadcom NetXtreme Gigabit Ethernet adapters contains two independent DMA channels for simultaneous read and write operations. Broadcom ®... Page 11: Asic With Embedded Risc Processor For copper-wire Ethernet connections, the state of the network link and activity is indicated by the LEDs on the RJ-45 connector, as described in Table 2: “Network Link and Activity Indicated by RJ-45 Port LEDs,” on page Broadcom Advanced Control Suite also provides information about the status of the network link and activity (see Viewing Adapter Information). Page 12: Section 3: Windows Driver And Management Application Installation Installing the Driver Software • Modifying the Driver Software • Repairing or Reinstalling the Driver Software • Removing the Device Drivers • Viewing or Changing the Properties of the Adapter • Setting Power Management Options Broadcom ® October 2020 • 2CS57XX-CDUM518 Page 12... Page 13: Installing The Driver Software If your controller was installed at the factory, the driver software has been installed for you. When Windows first starts after a hardware device (such as a Broadcom NetXtreme Adapter) has been installed, or after the existing device driver has been removed, the operating system automatically detects the hardware and prompts you to install the driver software for that device. Page 14: Using Silent Installation To modify the driver software 1. In Control Panel, double-click Add or Remove Programs. 2. Click Broadcom Drivers and Management Applications, and then click Change. 3. Click Next to continue. 4. Click Modify, Add, or Remove to change program features. This option does not install drivers for new adapters. Page 15: Repairing Or Reinstalling The Driver Software To remove the device drivers 1. In Control Panel, double-click Add or Remove Programs. 2. Click Broadcom Drivers and Management Applications, and then click Remove. Follow the on-screen prompts. 3. Reboot your system to completely remove the drivers. If you fail to reboot your system, you will not be able to successfully install the drivers. Page 16: Viewing Or Changing The Properties Of The Adapter Windows Driver and Management Application Installation Viewing or Changing the Properties of the Adapter To view or change the properties of the Broadcom network adapter 1. In Control Panel, click Broadcom Control Suite 4. 2. Click the Advanced section of the Configurations tab. Page 17: Section 4: Linux Driver And Management Application Installation Compressed tar (tg3-version.tar.gz) Identical source files to build the driver are included in both RPM and TAR source packages. The tar file contains additional utilities such as patches and driver disk images for network installation. Broadcom ® October 2020 • 2CS57XX-CDUM518... Page 18: Installing Tg3 Driver Thanks padgett. There's a bunch of stuff and I have almost zero ability to recognise important from junk, so here goes and thanks for your patience....The message I get (having uninstalled Broadcom 802.11) is 'there might be a problem with the driver for the Ethernet adapter, Windows couldn't automatically bind the IP protocol stack to the network adapter'From there, when I try to install the Broadcom 5.60.350.6_Win7x86x64, the InstallShield wizard fires up and tells me it will install Broadcom 802.11 (the adapter that stopped working and that I uninstalled. Twice. And deleted.).Hitting 'Next' -> tells me it's installing my new softwareRestart -> still no connection, info I see:- 'Set up wired network adapter' completed - Set up the network adapter to communicate with this network. This ensures that both Internet Protocol Version 4 (TCP/IPv4) and IP Version 6 (TCP/IPv6) can be used on the network adapter. There's a network diagnostics Log link that I cannot access.- same message as before re Ethernet adapter, plus 'there might be a problem with the driver for the WiFi 2 adapter'.Details: Windows couldn't automatically bind the IP protocol stack to the network adapterDiagnostics Information (Network Adapter), details about network adapter diagnosis:Network Adapter Ethernet driver informationDescription: Broadcom NetLink (TM) Gigabit EthernetManufacturer, Provider: BroadcomVersion: 15.6.0.14Inf file name: C:\WINDOWS\ING\oem17.infInf File Date: Tuesday April 22 2014 6:12:04 AMSection Name: DEV_KEY@.NTamd64.6.1Hardware ID: pci\ven_14&dev_1692Instance Status Flags: 0x180200aDevice Manager Status Code: 0IfType: 6Physical Media Type: 14Network Adapter Wi-Fi 2 driver information:Description: Broadcom 802.11 Newtork AdapterManufacturer, Provider: BroadcomVersion: 5.60.350.6Inf File Name: C:WINDOWS\INF\oem0.infInfbroadcom 802 11ac network adapter - Newegg.com
An important driver package that can enable your PC to gain full Network access! Home Drivers Broadcom 802.11n Network Adapter Driver 7.35.340.0 Old Versions Browse by CompanyAdobe, Apowersoft, Ashampoo, Autodesk, Avast, Corel, Cyberlink, Google, iMyFone, iTop, Movavi, PassFab, Passper, Stardock, Tenorshare, Wargaming, Wondershare Sponsored October, 17th 2024 - 12.81 MB - Freeware Review Old Versions Broadcom 802.11n Network Adapter Driver 7.35.340.0 Date released: 30 Dec 2015 (9 years ago) Broadcom 802.11n Network Adapter Driver 7.12.39.13 Date released: 17 Nov 2014 (10 years ago) Broadcom 802.11n Network Adapter Driver 7.12.39.0 Date released: 06 Sep 2014 (11 years ago) Broadcom 802.11n Network Adapter Driver 6.35.223.5 Date released: 14 Nov 2014 (10 years ago) Broadcom 802.11n Network Adapter Driver 6.30.223.234 Date released: 24 Apr 2014 (11 years ago) Broadcom 802.11n Network Adapter Driver 6.30.223.201 Date released: 05 Mar 2014 (11 years ago) Broadcom 802.11n Network Adapter Driver 3.100.64.0 (32-bit) Date released: 05 Dec 2005 (19 years ago). 802 broadcom adapter network 11n driver windows Broadcom bluetooth driver download in windows Broadcom stuurprogramma. Broadcom 802.11g Network Adapter 802 broadcom adapter network 11n driver windows Broadcom bluetooth driver download in windows Broadcom stuurprogramma Broadcom 802.11g Network AdapterBroadcom Network Adapter WLAN Driver .0 for
Contents Table of Contents Bookmarks Need help? Do you have a question about the High Power Wireless LAN 802.11b/g/n USB Adapter and is the answer not in the manual? Questions and answers Related Manuals for Powerlink High Power Wireless LAN 802.11b/g/n USB Adapter Summary of Contents for Powerlink High Power Wireless LAN 802.11b/g/n USB Adapter Page 2 POWERLINK High Power Wireless LAN 802.11b/g/n USB Adapter User Manual Before you proceed with the installation, please notice the following descriptions. Note 1: The following installation was operated under Windows XP. (Procedures are similar for Windows 98SE/Me/2000.) Note 2: If you have installed the WLAN USB driver & utility before, please uninstall the old version first. Page 3 POWERLINK High Power Wireless LAN 802.11b/g/n USB Adapter User Manual Choose a set up language Click Next to process the installation. Page 4 POWERLINK High Power Wireless LAN 802.11b/g/n USB Adapter User Manual Click Install to WLAN USB adaptor installation Click Finish to complete the installation. Page 5 POWERLINK High Power Wireless LAN 802.11b/g/n USB Adapter User Manual Uninstall Uninstall the WLAN USB Adaptor Driver from [start], [All Programs], [REALTEK 11n USB Wireless LAN Utility], click Uninstall or [Control Panel],[Add or Remove Programs], [REALTEK 11n USB Wireless LAN Driver and Utility], click Remove... Page 6 POWERLINK High Power Wireless LAN 802.11b/g/n USB Adapter User Manual B. Click Yes if you want to remove Wireless LAN USB Adaptor driver. C. Click Finish to complete uninstall. Page 7: Making A Basic Network Connection POWERLINK High Power Wireless LAN 802.11b/g/n USB Adapter User Manual Making a Basic Network Connection In the following instruction for making a network connection, we use the utility we provided to configure your wireless network settings. Note: For Windows XP users that want to configure your wireless network using... Page 8 POWERLINK High Power Software Depending on the kernel, the driver is installed to the following path: 2.6.x kernels: /lib/modules/kernel_version/kernel/drivers/net/tg3.ko 4. Load the driver. modprobe tg3 To configure the network protocol and address, refer to the Linux version-specific documentation. Broadcom ® October 2020 • 2CS57XX-CDUM518 Page 18... Page 19: Building The Driver From The Source Tar File If there is an interface configuration that is related to the tg3 driver, then bring the interface down first by using ifconfig ethx down and then rmmod tg3. Broadcom ® October 2020 • 2CS57XX-CDUM518... Page 20: Driver Messages Teaming with Channel Bonding With the TG3 driver, you can team adapters together using the bonding kernel module and a channel bonding interface. Refer to your Linux documentation for more information on Linux Channel Bonding. Broadcom ® October 2020 • 2CS57XX-CDUM518... Page 21: Section 5: Vmware Driver Software • tg3 NIC 0: Use the default number of NetQueues. • tg3 NIC 1: Disable the NetQueue feature. • tg3 NIC 2: Use 1 NetQueue. • tg3 NIC 3: Use 2 NetQueues. Broadcom ® October 2020 • 2CS57XX-CDUM518 Page 21... Page 22: Driver Parameters Most systems are set to dmesg -n level 6 by default. To see all messages, set the level higher. Driver Sign On tg3.c:v3.118g (Jan 4, 2012) NIC Detected Broadcom ® October 2020 • 2CS57XX-CDUM518 Page 22... Page 23 Link Up and Speed Indication tg3: vmnic0: Link is up at 1000 Mbps, full duplex. tg3: vmnic0: Flow control is on for TX and on for RX. Link Down Indication tg3: vmnic0: Link is down. Broadcom ® October 2020 • 2CS57XX-CDUM518 Page 23... Page 24: Section 6: Specifications Feature Specification PCI Express™ Type Controllers (BCM57XX Controllers) PCI Express Interface x1, x2, x4 link width PCI Express Aggregated Bandwidth (transmit 2.5 Gbps or 5.0 Gbps and receive) 10/100/1000BASE-T 10/100/1000 Mbps (full-duplex) Broadcom ® October 2020 • 2CS57XX-CDUM518 Page 24... Page 25: Section 7: Troubleshooting Checking for Network Link and Activity • Checking if Current Drivers Are Loaded • Running a Cable Length Test • Testing Network Connectivity • Broadcom Boot Agent • Kernel Debugging over Ethernet • Miscellaneous Broadcom ® October 2020 • 2CS57XX-CDUM518... Page 26: Troubleshooting Checklist Caution! Before you open the case of your system, review Safety Precautions. The following checklist provides recommended actions to take to resolve problems installing the Broadcom NetXtreme Gigabit Ethernet adapter or running it in your system. • Inspect all cables and connections. Verify that the cable connections at the network adapter and the switch are attached properly. Page 27: Checking If Current Drivers Are Loaded Table 7: Linux Driver Module Size Used by size Running a Cable Length Test In Windows environments, a cable length test can be run. See Analyzing CablesBroadcom Network Adapter Wireless Driver .0 for
Steps to Manually Update Linksys Compact Wireless-G USB Network Adapter with SpeedBooster Drivers: This built-in Linksys Compact Wireless-G USB Network Adapter with SpeedBooster driver should be included with your Windows® Operating System or is available through Windows® update. While these Ethernet Adapter drivers are basic, they support the primary hardware functions. Click here to see how to install the built-in drivers. Update Linksys Compact Wireless-G USB Network Adapter with SpeedBooster Drivers Automatically: Recommendation: We highly recommend using a tool like DriverDoc [Download DriverDoc - Product by Solvusoft] if you are inexperienced in updating Broadcom Ethernet Adapter device drivers. This tool does all of the work for you by downloading and updating your Linksys Compact Wireless-G USB Network Adapter with SpeedBooster drivers automatically, preventing you from installing the wrong drivers for your operating system version. Additionally, when you use DriverDoc to update your Ethernet Adapter drivers, you'll also be able to keep all of your other PC drivers updated by utilizing our extensive database of over 2,150,000 drivers (with daily updates), covering all hardware devices. Optional Offer for DriverDoc by Solvusoft | EULA | Privacy Policy | Terms | Uninstall Company: Broadcom Hardware Type: Ethernet Adapter Configuration: Linksys Compact Wireless-G USB Network Adapter with SpeedBooster Operating Systems: Windows XP, Vista, 7, 8, 10, 11 Optional Offer for DriverDoc by Solvusoft | EULA | Privacy Policy | Terms | Uninstall Linksys Compact Wireless-G USB Network Adapter with SpeedBooster Update FAQ When Should Linksys Compact Wireless-G USB Network Adapter with SpeedBooster Drivers Be Updated? Typically, you should update Linksys Compact Wireless-G USB Network Adapter with SpeedBooster device drivers after major Windows updates. What OS Is Compatible with Linksys Compact Wireless-G USB Network Adapter with SpeedBooster Drivers? Linksys Compact Wireless-G USB Network Adapter with SpeedBooster has available drivers version on Windows. What do Broadcom Ethernet Adapter Device Drivers do? Broadcom creates these small software programs to allow your Linksys Compact Wireless-G USB Network Adapter with SpeedBooster to interact with the specific version of your operating system. Why Are Linksys Compact Wireless-G USB Network Adapter with SpeedBooster Driver Updates Avoided? Most people fear that theyBroadcom 802.11n Network Adapter Driver .0 for
My laptop has Broadcom 802.11n Network Adapter AND Realtek PCIe GBE Family Controller. Difference? Thread starter Thread starter Grass-Hopper Start date Start date Feb 26, 2015 You are using an out of date browser. It may not display this or other websites correctly.You should upgrade or use an alternative browser. Status Not open for further replies. #1 I have a Toshiba laptop running Win 8.1. When I look under Device Manager>>Network Adapters, I see both "Broadcom 802.11n Network Adapter" and "Realtek PCIe GBE Family Controller" listed. What's the difference? Do I have two WiFi cards/drivers?. I think Broadcom is the one that is connected/used via WiFi to my router.If it helps here is some more detail:Broadcom 802.11n Network Adapter - Location: PCI bus 6, device 0, function 0Realtek PCIe GBE Family Controller - Location: PCI bus 1, device 0, function 0Before I did clean install from Win 7 to Win 8.1 on the laptop I think (I may be wrong) it used the Realtek for WiFi. I'm having some issues with loosing connections and have to run windows WiFi "troubleshoot problems" frequently to re-establish connection but, that's another topic for now.Thanks for your help. Sep 13, 2010 17,122 476 104,790 #2 The Realtek is the LAN port (Ethernet adapter) and the Broadcom is the wireless adapter. Be sure to install the correct latest drivers for each device. #3 The Realtek is the LAN port (Ethernet adapter) and the Broadcom is the wireless adapter. Be sure to install the correct latest drivers for each device. Real beast,Thanks. That makes sense. As far as getting the latest drivers for Broadcom and Realtek, that is part of my problem. Originally, my Toshiba laptop came with Windows 7. When I upgraded to Windows 8.1, I found out that Toshiba does not support the upgrade. 802 broadcom adapter network 11n driver windows Broadcom bluetooth driver download in windows Broadcom stuurprogramma. Broadcom 802.11g Network Adapter 802 broadcom adapter network 11n driver windows Broadcom bluetooth driver download in windows Broadcom stuurprogramma Broadcom 802.11g Network Adapter802 11n Wireless Usb Adapter Driver Download - Telegraph
After the installation of an application, when closing and reopening the App Center causes a crash. Company Hewlett Packard Categories Desktops & Worstation Serie Hewlett Packard HP TouchSmart Series Model Hewlett Packard HP TouchSmart 520-1100 Desktop PC series Description Driver-Original Information Original AMD Unified Graphics Driver Operating System Windows 7 (64-bit) Version 8.892.2.2000 Rev. A Size Driver 169.2 MB File Name sp55937.exe Date Jan 30, 2012 Observations This package provides the original driver for the AMD/ATI Radeon HD graphics solutions in supported models that are running a supported operating system.- Provides the original driver. Company Hewlett Packard Categories Desktops & Worstation Serie Hewlett Packard HP TouchSmart Series Model Hewlett Packard HP TouchSmart 520-1100 Desktop PC series Description Driver-Original Information Original AVerMedia TV Tuner Driver Operating System Windows 7 (64-bit) Version 1.1.64.56 Rev. A Size Driver 4.6 MB File Name sp54359.exe Date Jun 22, 2012 Observations This package provides the original driver for the AVerMedia TV tuner solutions in supported models that are running a supported operating system.- Provides the original driver. Company Hewlett Packard Categories Desktops & Worstation Serie Hewlett Packard HP TouchSmart Series Model Hewlett Packard HP TouchSmart 520-1100 Desktop PC series Description Driver-Original Information Original Broadcom Wireless Network Controller Driver Operating System Windows 7 (64-bit) Version 5.60.350.6 Rev. A Size Driver 7.9 MB File Name sp54360.exe Date Jan 12, 2012 Observations This package provides the original driver for the Broadcom WLAN Adapter solutions in supported models that are running a supported operating system.- Provides the original driver. Company Hewlett Packard Categories Desktops & Worstation Serie Hewlett Packard HP TouchSmart Series Model Hewlett Packard HP TouchSmart 520-1100 Desktop PC series Description Driver-Original Information Original Broadcom Wireless Network Controller Driver Operating System Windows 7 (64-bit) Version 5.100.82.105 Rev. A Size Driver 67.5 MB File Name sp56209.exe Date Feb 14, 2012Comments
Heavy, the adapter issues one host interrupt for multiple, back-to-back incoming packets, preserving host CPU cycles. Dual DMA Channels The PCIe interface on Broadcom NetXtreme Gigabit Ethernet adapters contains two independent DMA channels for simultaneous read and write operations. Broadcom ®... Page 11: Asic With Embedded Risc Processor For copper-wire Ethernet connections, the state of the network link and activity is indicated by the LEDs on the RJ-45 connector, as described in Table 2: “Network Link and Activity Indicated by RJ-45 Port LEDs,” on page Broadcom Advanced Control Suite also provides information about the status of the network link and activity (see Viewing Adapter Information). Page 12: Section 3: Windows Driver And Management Application Installation Installing the Driver Software • Modifying the Driver Software • Repairing or Reinstalling the Driver Software • Removing the Device Drivers • Viewing or Changing the Properties of the Adapter • Setting Power Management Options Broadcom ® October 2020 • 2CS57XX-CDUM518 Page 12... Page 13: Installing The Driver Software If your controller was installed at the factory, the driver software has been installed for you. When Windows first starts after a hardware device (such as a Broadcom NetXtreme Adapter) has been installed, or after the existing device driver has been removed, the operating system automatically detects the hardware and prompts you to install the driver software for that device. Page 14: Using Silent Installation To modify the driver software 1. In Control Panel, double-click Add or Remove Programs. 2. Click Broadcom Drivers and Management Applications, and then click Change. 3. Click Next to continue. 4. Click Modify, Add, or Remove to change program features. This option does not install drivers for new adapters. Page 15: Repairing Or Reinstalling The Driver Software To remove the device drivers 1. In Control Panel, double-click Add or Remove Programs. 2. Click Broadcom Drivers and Management Applications, and then click Remove. Follow the on-screen prompts. 3. Reboot your system to completely remove the drivers. If you fail to reboot your system, you will not be able to successfully install the drivers. Page 16: Viewing Or Changing The Properties Of The Adapter Windows Driver and Management Application Installation Viewing or Changing the Properties of the Adapter To view or change the properties of the Broadcom network adapter 1. In Control Panel, click Broadcom Control Suite 4. 2. Click the Advanced section of the Configurations tab. Page 17: Section 4: Linux Driver And Management Application Installation Compressed tar (tg3-version.tar.gz) Identical source files to build the driver are included in both RPM and TAR source packages. The tar file contains additional utilities such as patches and driver disk images for network installation. Broadcom ® October 2020 • 2CS57XX-CDUM518... Page 18: Installing Tg3 Driver
2025-04-09Thanks padgett. There's a bunch of stuff and I have almost zero ability to recognise important from junk, so here goes and thanks for your patience....The message I get (having uninstalled Broadcom 802.11) is 'there might be a problem with the driver for the Ethernet adapter, Windows couldn't automatically bind the IP protocol stack to the network adapter'From there, when I try to install the Broadcom 5.60.350.6_Win7x86x64, the InstallShield wizard fires up and tells me it will install Broadcom 802.11 (the adapter that stopped working and that I uninstalled. Twice. And deleted.).Hitting 'Next' -> tells me it's installing my new softwareRestart -> still no connection, info I see:- 'Set up wired network adapter' completed - Set up the network adapter to communicate with this network. This ensures that both Internet Protocol Version 4 (TCP/IPv4) and IP Version 6 (TCP/IPv6) can be used on the network adapter. There's a network diagnostics Log link that I cannot access.- same message as before re Ethernet adapter, plus 'there might be a problem with the driver for the WiFi 2 adapter'.Details: Windows couldn't automatically bind the IP protocol stack to the network adapterDiagnostics Information (Network Adapter), details about network adapter diagnosis:Network Adapter Ethernet driver informationDescription: Broadcom NetLink (TM) Gigabit EthernetManufacturer, Provider: BroadcomVersion: 15.6.0.14Inf file name: C:\WINDOWS\ING\oem17.infInf File Date: Tuesday April 22 2014 6:12:04 AMSection Name: DEV_KEY@.NTamd64.6.1Hardware ID: pci\ven_14&dev_1692Instance Status Flags: 0x180200aDevice Manager Status Code: 0IfType: 6Physical Media Type: 14Network Adapter Wi-Fi 2 driver information:Description: Broadcom 802.11 Newtork AdapterManufacturer, Provider: BroadcomVersion: 5.60.350.6Inf File Name: C:WINDOWS\INF\oem0.infInf
2025-04-22An important driver package that can enable your PC to gain full Network access! Home Drivers Broadcom 802.11n Network Adapter Driver 7.35.340.0 Old Versions Browse by CompanyAdobe, Apowersoft, Ashampoo, Autodesk, Avast, Corel, Cyberlink, Google, iMyFone, iTop, Movavi, PassFab, Passper, Stardock, Tenorshare, Wargaming, Wondershare Sponsored October, 17th 2024 - 12.81 MB - Freeware Review Old Versions Broadcom 802.11n Network Adapter Driver 7.35.340.0 Date released: 30 Dec 2015 (9 years ago) Broadcom 802.11n Network Adapter Driver 7.12.39.13 Date released: 17 Nov 2014 (10 years ago) Broadcom 802.11n Network Adapter Driver 7.12.39.0 Date released: 06 Sep 2014 (11 years ago) Broadcom 802.11n Network Adapter Driver 6.35.223.5 Date released: 14 Nov 2014 (10 years ago) Broadcom 802.11n Network Adapter Driver 6.30.223.234 Date released: 24 Apr 2014 (11 years ago) Broadcom 802.11n Network Adapter Driver 6.30.223.201 Date released: 05 Mar 2014 (11 years ago) Broadcom 802.11n Network Adapter Driver 3.100.64.0 (32-bit) Date released: 05 Dec 2005 (19 years ago)
2025-04-07Contents Table of Contents Bookmarks Need help? Do you have a question about the High Power Wireless LAN 802.11b/g/n USB Adapter and is the answer not in the manual? Questions and answers Related Manuals for Powerlink High Power Wireless LAN 802.11b/g/n USB Adapter Summary of Contents for Powerlink High Power Wireless LAN 802.11b/g/n USB Adapter Page 2 POWERLINK High Power Wireless LAN 802.11b/g/n USB Adapter User Manual Before you proceed with the installation, please notice the following descriptions. Note 1: The following installation was operated under Windows XP. (Procedures are similar for Windows 98SE/Me/2000.) Note 2: If you have installed the WLAN USB driver & utility before, please uninstall the old version first. Page 3 POWERLINK High Power Wireless LAN 802.11b/g/n USB Adapter User Manual Choose a set up language Click Next to process the installation. Page 4 POWERLINK High Power Wireless LAN 802.11b/g/n USB Adapter User Manual Click Install to WLAN USB adaptor installation Click Finish to complete the installation. Page 5 POWERLINK High Power Wireless LAN 802.11b/g/n USB Adapter User Manual Uninstall Uninstall the WLAN USB Adaptor Driver from [start], [All Programs], [REALTEK 11n USB Wireless LAN Utility], click Uninstall or [Control Panel],[Add or Remove Programs], [REALTEK 11n USB Wireless LAN Driver and Utility], click Remove... Page 6 POWERLINK High Power Wireless LAN 802.11b/g/n USB Adapter User Manual B. Click Yes if you want to remove Wireless LAN USB Adaptor driver. C. Click Finish to complete uninstall. Page 7: Making A Basic Network Connection POWERLINK High Power Wireless LAN 802.11b/g/n USB Adapter User Manual Making a Basic Network Connection In the following instruction for making a network connection, we use the utility we provided to configure your wireless network settings. Note: For Windows XP users that want to configure your wireless network using... Page 8 POWERLINK High Power
2025-04-13Software Depending on the kernel, the driver is installed to the following path: 2.6.x kernels: /lib/modules/kernel_version/kernel/drivers/net/tg3.ko 4. Load the driver. modprobe tg3 To configure the network protocol and address, refer to the Linux version-specific documentation. Broadcom ® October 2020 • 2CS57XX-CDUM518 Page 18... Page 19: Building The Driver From The Source Tar File If there is an interface configuration that is related to the tg3 driver, then bring the interface down first by using ifconfig ethx down and then rmmod tg3. Broadcom ® October 2020 • 2CS57XX-CDUM518... Page 20: Driver Messages Teaming with Channel Bonding With the TG3 driver, you can team adapters together using the bonding kernel module and a channel bonding interface. Refer to your Linux documentation for more information on Linux Channel Bonding. Broadcom ® October 2020 • 2CS57XX-CDUM518... Page 21: Section 5: Vmware Driver Software • tg3 NIC 0: Use the default number of NetQueues. • tg3 NIC 1: Disable the NetQueue feature. • tg3 NIC 2: Use 1 NetQueue. • tg3 NIC 3: Use 2 NetQueues. Broadcom ® October 2020 • 2CS57XX-CDUM518 Page 21... Page 22: Driver Parameters Most systems are set to dmesg -n level 6 by default. To see all messages, set the level higher. Driver Sign On tg3.c:v3.118g (Jan 4, 2012) NIC Detected Broadcom ® October 2020 • 2CS57XX-CDUM518 Page 22... Page 23 Link Up and Speed Indication tg3: vmnic0: Link is up at 1000 Mbps, full duplex. tg3: vmnic0: Flow control is on for TX and on for RX. Link Down Indication tg3: vmnic0: Link is down. Broadcom ® October 2020 • 2CS57XX-CDUM518 Page 23... Page 24: Section 6: Specifications Feature Specification PCI Express™ Type Controllers (BCM57XX Controllers) PCI Express Interface x1, x2, x4 link width PCI Express Aggregated Bandwidth (transmit 2.5 Gbps or 5.0 Gbps and receive) 10/100/1000BASE-T 10/100/1000 Mbps (full-duplex) Broadcom ® October 2020 • 2CS57XX-CDUM518 Page 24... Page 25: Section 7: Troubleshooting Checking for Network Link and Activity • Checking if Current Drivers Are Loaded • Running a Cable Length Test • Testing Network Connectivity • Broadcom Boot Agent • Kernel Debugging over Ethernet • Miscellaneous Broadcom ® October 2020 • 2CS57XX-CDUM518... Page 26: Troubleshooting Checklist Caution! Before you open the case of your system, review Safety Precautions. The following checklist provides recommended actions to take to resolve problems installing the Broadcom NetXtreme Gigabit Ethernet adapter or running it in your system. • Inspect all cables and connections. Verify that the cable connections at the network adapter and the switch are attached properly. Page 27: Checking If Current Drivers Are Loaded Table 7: Linux Driver Module Size Used by size Running a Cable Length Test In Windows environments, a cable length test can be run. See Analyzing Cables
2025-04-13