Hs ln

Power (flash power), “PB” stands for Lead Gel Battery attached.The fuse may not be inserted into the battery. If not, the fuse may be damaged and need a replacement.Please check the operating instructions, page 8 & 9:www.elinchrom.com/download.php?file=19&ln=en Change ID unit number It is not possible to change the flash unit ID numbers.The ID number is unique to each product and currently unchangeable.But you can give a custom name directly from the Elinchrom App / Software. Battery airplane transportation regulations Look for regulation PDF documents in the Download Center. How to setup Hi-Sync/HSS ? Hi-Sync or HSS mode is detected automatically.Enabling the Hi-Sync/HSS feature is very simple but different for each camera.However, some cameras need a specific setup to be able to engage Hi-Sync or HSS.How to setup hi-sync / hss mode. Using 2 heads in Hi-Sync mode Yes, but it is not recommended.Using 2 HS heads in Hi-Sync mode on an ELB or Quadra pack is possible. But please note that this will drastically affect results if Hi-Sync is used since the flash duration is faster when 2 heads are plugged in.For optimal results, we advise using only one head, use only output A if Hi-Sync matters. Flashtube turned dark A flashtube that turns dark at the electrodes after the first usage can happen after the first burn-in.It depends on the type of electrodes that are used in specific flash tubes as the Quadra HS heads.On some other types, you have a kind of white rests at the electrodes. Flash counter The value of the flash counter on a new unit could vary due to the factory quality control procedure.To ensure proper and quality unit reliability, the components drive through a burn-in test which can be about 48 hours with an automated process. It is more a charge/discharge and on/off process to test and burn-in components. Factory controls are done without the flash tube. HS and HSS in the same setup Yes, TTL Elinchrom units integrated into an existing Elinchrom setup with Hi-Sync and HSS altogether work seamlessly.Read more about this. Elinchrom’s HSS compared with Elinchrom’s Hi-Sync The ELB 400 with a Quadra HS head and the ELB 500 TTL with an ELB 500 head are so very similar from power output. Whether one is more powerful than the other now depends upon the individual camera.HSS offers the advantage of less exposure banding and no gradient in the exposure than HS. Elinchrom TTL units in a classic Elinchrom setup Yes, you can use Elinchrom TTL units together with older Elinchrom flash units, but only in Manual mode, of course. Using the ELB units on mains The life span of the battery is not affected while using the battery packs on mains.You can leave the charger connected, but if you shot with high flash power in short cycles, the battery will discharge even with the charger connected.If you do not use full power flashes, the unit can take a breath after a series of flashes, and the unit will not overheat.

Flash duration depends on your flash power settings. Fast to slow recycle time This is a normal effect to prevent the unit from heating too much. Error P or PB “P” stands for Power (flash power), “PB” stands for Lead Gel Battery attached.The fuse may not be inserted into the battery. If not, the fuse may be damaged and need a replacement.Please check the operating instructions, page 8 & 9:www.elinchrom.com/download.php?file=19&ln=en Modeling light dimming control .0.$1.0.$right.0.0.1.0.$end:0:$text12:0">Unfortunately, the LED modeling lamp of the Quadra/ELB 400 is not dimmable, therefore, you cannot control its intensity. Using the ELB 400 while charging It is absolutely safe to use the ELB 400 or Quadra while charging. Using a Lead Gel battery with an ELB 400 The Lead Gel battery can be used with an ELB 400 without any damage to the unit, it’s just a loss of performance.Please note:The ELB 400 battery status display will not work correctly with Lead Gel batteries.The ELB 400 will switch to ECO (slow) mode due to the lower voltage of the Lead Gel battery.The recycling time will increase and the number of flashes will be reduced.The ELB 400 will switch off earlier, maybe already at 50% of the charge due to the lower voltage. What are the 3 different Quadra heads? The Quadra HS head was designed for optimal performance for Hi-Sync. The Quadra Action (or A) is too fast for the highest shutter speeds which might result in disappointing results. Lowering the shutter speed will produce better results.The Quadra Pro (or S) head is usable up to higher shutter speeds.Learn more about the 3 Quadra headsIs your gear compatible with Hi-Sync? Is the Quadra HS head compatible with a Quadra unit? Yes, it is 100% compatible.The Quadra HS head is compatible with the ELB 400 and all previous generations of Quadra packs. Change ID unit number It is not possible to change the flash unit ID numbers.The ID number is unique to each product and currently unchangeable.But you can give a custom name directly from the Elinchrom App / Software. Using strobo mode with an HS Head We don’t recommend using the strobo feature when using an HS head. The ELB 400 doesn’t match the specs The ELB 400 can only charge faster when used with the latest Li-Ion battery (59 Wh, 14.4 V) Code number: 19295.The Lead Gel Battery offers only 12 V, which slows down the ELB 400. However, with the dedicated Li-Ion battery, it will match the specifications. Battery airplane transportation regulations Look for regulation PDF documents in the Download Center. Quadra / ELB 400 unit is not working anymore Please check that the fuse is inserted correctly in the battery box. How to setup Hi-Sync/HSS ? Hi-Sync or HSS mode is detected automatically.Enabling the Hi-Sync/HSS feature is very simple but different for each camera.However, some cameras need a specific setup to be able to engage Hi-Sync or HSS.How to setup hi-sync / hss mode. What is the S Quadra head? The “S” Quadra head

200 – 300 Kelvin or even less, but when set to a certain flash power output each flash is consistent.At minimum power, the flash color temperature tends to be warmer. At full power, it tends to be cooler, due to the voltage regulation of the capacitor for different flash power outputs.This will not affect the image result, since studio lights are a mix of old and new units at different power levels with silver and white reflectors or Softboxes of different brands and fabrics.The difference between a silver reflector and a softbox can show a gap in the color temperature, maybe 500 K or more.The flash duration and specifications at full power you find in the user manuals. Error P or PB “P” stands for Power (flash power), “PB” stands for Lead Gel Battery attached.The fuse may not be inserted into the battery. If not, the fuse may be damaged and need a replacement.Please check the operating instructions, page 8 & 9:www.elinchrom.com/download.php?file=19&ln=en Is the Quadra HS head compatible with a Quadra unit? Yes, it is 100% compatible.The Quadra HS head is compatible with the ELB 400 and all previous generations of Quadra packs. Elinchrom and Phottix (Odin II) Odin II is one of the two remote options in the ELB 500 TTL settings menu.When this remote option is enabled, the ELB 500 TTL is compatible with Phottix Odin II transmitters and Phottix products with built-in Odin II or with Phottix Odin II receivers.Only available for Canon and Nikon. Change ID unit number It is not possible to change the flash unit ID numbers.The ID number is unique to each product and currently unchangeable.But you can give a custom name directly from the Elinchrom App / Software. Battery airplane transportation regulations Look for regulation PDF documents in the Download Center. How to setup Hi-Sync/HSS ? Hi-Sync or HSS mode is detected automatically.Enabling the Hi-Sync/HSS feature is very simple but different for each camera.However, some cameras need a specific setup to be able to engage Hi-Sync or HSS.How to setup hi-sync / hss mode. Exchange a Quadra flashtube You cannot replace the flashtube of a Quadra A head with a Quadra HS – flashtube.The plugin triggers are different and the security cannot be guaranteed if you try to replace a flashtube with another one. Flash counter The value of the flash counter on a new unit could vary due to the factory quality control procedure.To ensure proper and quality unit reliability, the components drive through a burn-in test which can be about 48 hours with an automated process. It is more a charge/discharge and on/off process to test and burn-in components. Factory controls are done without the flash tube. Can the ELB 500 TTL achieve Hi-Sync? Hi-Sync is not available with the ELB 500 TTL. HSS will be enabled automatically with compatible cameras. ELB 500, ELB 400 / Quadra head compatibility The ELB 500 head is not compatible with the Quadra / ELB 400 Unit.The Quadra heads cannot be used on ELB